38DL PLUS Specifications/奧林巴斯38DL PLUS超聲測厚儀-深圳市偉峰儀器儀表有限公司

Measurements
Dual element transducer measurement mode	Time interval from a precision delay after the excitation pulse to the first echo
THRU-COAT® measurement	Measurement of true metal and coating thicknesses with a single back-wall echo （with D7906-SM and D7908 transducers）
Thru-Paint Echo-to-Echo	Time interval between two successive back-wall echoes to eliminate paint or coating thickness
Single element transducer measurement modes	Mode 1: Time interval between the excitation pulse and the first back-wall echo Mode 2: Time interval between the delay line echo and the first back-wall echo （with delay or immersion transducers） Mode 3: Time interval between successive back-wall echoes following the first interface echo after the excitation pulse （with delay line or immersion transducers） Oxide: optional Multilayer mode: optional
`Thickness range	0.080 mm to 635.00 mm （0.003 in. to 25.000 in.） depending on material, transducer surface conditions, temperature, and selected configuration
Material velocity range	0.508 mm/μs to 13.998 mm/μs （0.020 in./μs to 0.551 in./μs）
Resolution （selectable）	Low: 0.1 mm （0.01 in.） Standard: 0.01 mm （0.001 in.） High Resolution （optional）: 0.001 mm （0.0001 in.）
Transducer frequency range	Standard: 2.0 MHz to 30 MHz （-3 dB） High Penetration （optional）: 0.50 MHz to 30 MHz （-3 dB）

General
Operating temperature range	-10 °C to 50 °C （14 °F to 122 °F）
Keypad	Sealed, color-coded keypad with tactile and audible feedback
Case	Impact-resistant and water-resistant, gasketed case with sealed connectors. Designed for IP67.
Dimensions （W x H x D）	Overall: 125 mm x 211 mm x 46 mm （4.92 in. x 8.31 in. x 1.82 in.）
Weight	0.814 kg （1.80 lb）
Power supply	AC/DC adaptor, 24 V; lithium-ion battery 23.760 Wh; or 4 AA auxiliary batteries
Battery life, lithium-ion	Operating time: minimum 12.6 h, 14 h typical, 14.7 h maximum Fast charge: 2 h to 3 h
Standards	Designed for EN15317

Display
Color transflective VGA display	Liquid crystal display, display area 56.16 mm x 74.88 mm （2.2 in. x 2.95 in.）
Rectification	Full wave, RF, half-wave positive, or half-wave negative

Inputs/Outputs
USB	1.0 client
RS-232	Yes
Memory card	Maximum capacity: 2 GB External MicroSD memory card
Video output	VGA output standard

Internal Data logger
Data logger	The 38DL PLUS identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage configuration information through the standard RS-232 serial port or USB port.
Capacity	475,000 thickness measurements or 20,000 waveforms with thickness measurements
File names, IDs, and comments	32-character file names and 20-character alphanumeric location codes with four comments per location
File structures	Nine standard or custom application-specific file structures
Reports	On-gage reporting of summary with statistics, Min./Max. with locations, Min. review, file comparison, and alarm report

奧林巴斯38DL PLUS超聲測厚儀Software Options

38DLP-OXIDE （U8147014）: Code-activated Internal Oxide measurement software
38DLP-HR （U8147015）: Code-activated High Resolution measurement software
38DLP-MM （U8147016）: Code-activated Multilayer measurement software
38DLP-HP （U8147017）: Code-activated High Penetration （low frequency） measurement software

Optional Accessories

38DLP/EW （U8778348）: Three-year warranty
1/2XA/E110 （U8767104）: Filter adaptor for E110-SB EMAT transducer
38-9F6 （U8840167）: RS-232 cable
38-C-USB-IP67 （U8800998）: USB cable for IP67 sealed operation
38DLP/RFS （U8780288）:Foot switch, factory installed
HPV/C （U8840172）: Digital caliper for thickness input for velocity measurements
38DLP-V-CC （U8780124）: Cable for digital caliper
38DLP/BCW/NC （U8780289）: Bar code reader
EPLTC-C-VGA-6 （U8840035）:VGA output cable
MICROSD-ADP-2GB （U8779307）: 2 GB External MicroSD memory card

上一篇：Magna-Mike 8600測厚儀測厚操作更便捷

下一篇：美能達T-10A/T-10MA/T-10WsA/T-10WLA照度計

返回列表>>